Skip to main content

Advanced LED and PCA SKIN® Professional Treatment Protocol: Aging Skin

Treatment Protocol

This advanced LED treatment will provide immediate smoothing, brightening and hydrating benefits to your patients’ skin post-treatment. This protocol is most appropriate for Fitzpatrick skin types I – V with normal to dry skin, concerned with fine lines and wrinkles.

Cleanse

  1. Facial Wash Oily/Problem – Cleanse the area of treatment thoroughly, remove with warm water and pat dry.

Prep

2. Smoothing Toner – Apply with a cotton pad to prep the skin. Allow the skin to dry. This product may sting or tingle on some individuals. Asses sensitivity by asking the patient, “On a scale of one to ten, ten being extremely active, how do you rate this sensation?”

Pre-Treat

3. Hydrate: Therapeutic Oat Milk Mask – Apply a quarter-sized amount to the area of treatment using a fan brush. Allow the mask to remain on the skin for up to 10 minutes. Remove completely with cotton squares moisten with warm water.

Treat

4. LED – Administer LED according to manufacture guidelines.

Treat 

5. Ultra Peel®

      • Before using, gently agitate the product. Apply the first layer with a cotton pad.
      • Use the scale of one to ten to gauge sensitivity. Fan the skin to keep the patient cool between layers. If the patient responds 6 or higher, do not proceed with another layer. If the patient’s response is between 1 and 5, proceed with another layer.
      • Wait until the patient’s sensitivity begins to subside before applying the next layer. The patient will begin to rate lower on the scale of 1 – 10 approximately one to five minutes after each layer is applied.
      • The total number of layers is determined by the needs, goals and individual sensitivity of the patient.
      • The maximum number of layers is two when incorporating with LED.

Correct

6. ExLinea® Pro Peptide Serum – Apply one to two pumps to areas of facial expression wrinkling to reduce the depth of fine lines and wrinkles.

7.  C&E Advanced and Hyaluronic Acid Boosting Serum – Apply a pea-sized amount of C&E Advanced with one two pumps of Hyaluronic Acid Boosting Serum to protect from free radical damage and plump and firm the skin through increased hydration.

8. Vitamin b3 Brightening Serum – Apply one to two pumps to reduce the appearance of dark spots and uneven skin tone while improving skin barrier function.

9. Dual Action Redness Relief – Apply one to two pumps to calm the skin and reduce inflammation.

Retinoid booster (optional)

10.  Advanced Treatment Booster – Dispense two pumps into gloved hands. Gently spread the product over the area of treatment, keeping application even and thin.

      • Use the scale of one to ten to gauge sensitivity. Most patients will not have any sensitivity to this product.
      • The maximum number of layers is one.

Hydrate and Protect

11. ReBalance and Hydrator Plus Broad Spectrum SPF 30 – Complete the treatment with this combination to calm, hydrate and protect the skin from UVA/UVB rays.